Note. Factory Fit specialise in professional parts which don't include fitting instructions. For most parts it is relatively easy to figure out how they install. Factory Fit NEVER sells a part that has not been previously tested and in most cases 100's or 1000's have been sold so we know they fit. If you will need fitting instructions then these should be sort on Youtube, Google, forums etc BEFORE making a purchase.  

Product Introduction    
Since 2008 Factory Fit has become one of Australia's largest wholesalers of automotive accessories and now with a shift to retail sales, we are bringing our customers the best quality, at the worlds lowest prices.

 

Product Features:

This harness from Factory Fit will allow you to plug an aftermarket camera into the original screen of the vehicles listed below. 

This product is also known to work in the following vehicles:
Toyota Corolla 2013- Sedan
Toyota RAV4 2013-
Toyota Kluger 2014-
Toyota Aurion 2015-
Toyota Corolla 2015- Hatch
Toyota Hilux 2015-
Toyota Hilux 2014
Subaru Forester 2015- SJ
Subaru Impreza 2015- GP, GJ
Subaru Liberty (Legacy) 2015 -
Subaru WRX 2015- (MY16)
Subaru XV 2016- GP, GJ
Subaru Outback 2015-

Subaru Levorg 2016- V1

Toyota Corolla 2017- 2019 Sedan

Toyota Landcruiser 2016- 200 Series

 

There may be imitations on the market but there's only one Factory Fit.

 

Factory Fit, a Seller you can Trust!

Since 2008 we have built up a reputation of selling products that offer value for money with unbeatable After Sales Support. If you're after a high quality and functional products for your vehicle and would prefer to deal with a local seller for ongoing support then look no further. Dealing with overseas sellers from China and HK (or sellers that tell you an item is located in Australia but then send to you from overseas) can sometimes be a pleasant experience but often when things turn bad you'll never hear from them again. As an Australian seller, we offer a local phone number and back our product for the life of the warranty and beyond.

All Factory Fit products are stocked in Melbourne, Australia (unless otherwise specified) and in the unlikely and unfortunate event that your product arrives faulty, we'll replace it if it's deemed by our engineers to be a manufacture (not installation) fault. If you are buying from an overseas seller please check first who pays frieght in the event of receiving a faulty product and how long the problem will take to rectify.

 


 Shipping and Handling    


Important. Although many sellers may state they are located in Australia, they may not be. Before any purchase check that the goods are in Australia. If the goods are shipped from overseas you may need to wait longer for your item, need to pay customs taxes and return a faulty product back overseas. Unless otherwise stated, ALL Factory Fit items are warehoused in Melbourne, Australia.

Factory Fit will ship to confirmed Paypal addresses only. In most cases you will receive your item within 4 days. If there is a delay Factory Fit will be in contact with you. Please advise your phone number at checkout so we can get in touch with you if there is any problem.

If requested, we can supply the tracking number to you. If we are shipping outside Australia then the buyer is responsible for destination import tax/charges. We will reduce this where possible by nominating a low value and sending as a 'gift'. Factory Fit reserves the right not to be held responsible for a delay caused by import customs as this is out of our control.

Factory Fit will supply all international customers and in most cases ship direct from our freight forwarder in China. If you have any concerns please ask.


 Payment Policy    


Immediate Payment is required after the Winning Bid via paypal. If you do not have a Paypal account, please message us for another payment option. Discounts apply for direct deposit and cash with local pickups. If you require our Company Bank Account details for direct deposit please email or message us.


 Returns Policy    
Factory Fit products are covered by a minimum 1 year warranty from the original purchase date. Following any repairs or replacement you will be covered by a minimum 1 month warranty or the remainder of your new product warranty, whichever is greater. If you do find a product purchased from Factory Fit becomes faulty within 12-months of your purchase, simply send the faulty part back for repair or replacement (at our discretion). Non-manufacture faults (neglect, improper installation, misuse or incorrect service) and consumables are not be covered by this warranty. Freight to and from our service centre in Melbourne to be covered by the buyer. Please message Factory Fit for detailed terms of this warranty.

Note. The limited Factory Fit warranty is not transferable and all warranties should be handled through the original purchaser. Factory Fit reserves the right to refuse warranty in such cases.

Factory Fit guarantees that all items sold are brand new and quality tested before shipment (unless otherwise stated).

Important: If a non-manufacturing fault is found during a Factory Fit inspection, Factory Fit will request from the purchaser the repair cost plus two way postage before the product is returned.

Factory Fit offers a 7 day return policy. In the unlikely event that you receive an incorrect item, please ensure you return it to Factory Fit within 7 days, in original packaging and in brand new, un-installed, resalable condition. Please contact us for a Return Authorisation Form (RTA) before sending anything back to Factory Fit.  

 

 


 About US    


Factory Fit is a Melbourne, Australia based operation and since 2008, a proud supplier to the Car Audio/Video industry on a wholesale base. Factory Fit are now going direct to offer consumers and installers the best value for money on car audio fitting accessories to become the number one supplier. We have over 10 years experience in electronics, tooling, industrial design and engineering, and we are proud to acknowledge our commitment to offering a high level of After Sales service, even years after your purchase. We provide an Australian phone number on request and unlimited support during business hours.

Factory Fit will strive to offer a large range of accessories for any vehicle. If you have an item you are looking for please message us and if we can get it, we will order it in for you.

LEGAL DISCLAIMER:

It is an offence to copy the descriptions and/or images of another business/seller. If you copy any of our descriptions or images we will contact eBay and your account will be suspended. Factory Fit reserves the right of all descriptions and images listed in this listing.

 

 

Factory Fit - Refined Automotive

Customer Service open hours are Monday to Friday (9am to 6pm AEST)

 

At Factory Fit we don’t focus on sourcing the cheapest products but do focus on sourcing the best quality products and trimming our margins to give you the best deal.

 

 

 

SKU APVTY12
Barcode # 9357423014895
Brand Factory Fit
Shipping Weight 0.0490kg
Shipping Width 0.130m
Shipping Height 0.070m
Shipping Length 0.035m
Assembled Width 0.130m

Shipping and Handling

Important. Although many sellers may state they are located in Australia, they may not be. Before any purchase check that the goods are in Australia. If the goods are shipped from overseas you may need to wait longer for your item, need to pay customs taxes and return a faulty product back overseas. Unless otherwise stated, ALL Factory Fit items are warehoused in Melbourne, Australia.

Factory Fit will ship to confirmed Paypal addresses only. In most cases you will receive your item within 4 days. If there is a delay Factory Fit will be in contact with you. Please advise your phone number at checkout so we can get in touch with you if there is any problem.

If requested, we can supply the tracking number to you. If we are shipping outside Australia then the buyer is responsible for destination import tax/charges. We will reduce this where possible by nominating a low value and sending as a 'gift'. Factory Fit reserves the right not to be held responsible for a delay caused by import customs as this is out of our control.

Factory Fit will supply all international customers and in most cases ship direct from our freight forwarder in China. If you have any concerns please ask.

 

Payment Policy

Immediate Payment is required after the Winning Bid via paypal. If you do not have a Paypal account, please message us for another payment option. Discounts apply for direct deposit and cash with local pickups. If you require our Company Bank Account details for direct deposit please email or message us.

 

Returns Policy

Factory Fit products are covered by a minimum 1 year warranty from the original purchase date. Following any repairs or replacement you will be covered by a minimum 1 month warranty or the remainder of your new product warranty, whichever is greater. If you do find a product purchased from Factory Fit becomes faulty within 12-months of your purchase, simply send the faulty part back for repair or replacement (at our discretion). Non-manufacture faults (neglect, improper installation, misuse or incorrect service) and consumables are not be covered by this warranty. Freight  to and from our service centre in Melbourne to be covered by the buyer. Please message Factory Fit for detailed terms of this warranty.

Note. The limited Factory Fit warranty is not transferable and all warranties should be handled through the original purchaser. Factory Fit reserves the right to refuse warranty in such cases.

Factory Fit guarantees that all items sold are brand new and quality tested before shipment (unless otherwise stated).

Important: If a non-manufacturing fault is found during a Factory Fit inspection, Factory Fit will request from the purchaser the repair cost plus two way postage before the product is returned.

Factory Fit offers a 7 day return policy. In the unlikely event that you receive an incorrect item, please ensure you return it to Factory Fit within 7 days, in original packaging and in brand new, un-installed, resalable condition. Please contact us for a Return Authorisation Form (RTA) before sending anything back to Factory Fit.

 
About Us

Factory Fit is a Melbourne, Australia based operation and since 2008, a proud supplier to the Car Audio/Video industry on a wholesale base. Factory Fit are now going direct to offer consumers and installers the best value for money on car audio fitting accessories to become the number one supplier. We have over 10 years experience in electronics, tooling, industrial design and engineering, and we are proud to acknowledge our commitment to offering a high level of After Sales service, even years after your purchase. We provide an Australian phone number on request and unlimited support during business hours.

Factory Fit will strive to offer a large range of accessories for any vehicle. If you have an item you are looking for please message us and if we can get it, we will order it in for you.

LEGAL DISCLAIMER:

It is an offence to copy the descriptions and/or images of another business/seller. If you copy any of our descriptions or images we will contact eBay and your account will be suspended. Factory Fit reserves the right of all descriptions and images listed in this listing.

 

Melbourne-Based 12-Month Warranty!

Aftermarket Video Reverse Camera Adapter to factory fitted Colour Screens for Toyota Subaru APVTY12 has a rating of 0/5 based on 0 reviews.

Be The First To Review This Product!

Help other Masten Enterprises Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review